[Guide] How to hack your Nokia Symbian Belle FP2 device

Nokia has released the Symbian (Nokia) Belle FP2 software update for the Nokia 701, Nokia 700, Nokia 603 and the Nokia 808 PureView. Following this update, you will not be able to use previous hacking methods on your devices as you will receive a component built-in error. The following guide will show you how to hack the above mentioned Nokia Belle FP2 devices only using a ROM Patcher+ method. But it will use Safe Manager to insert the ROM patcher files to C:/sys/bin instead of using antivirus apps.

Safe Manager is a powerful multi-functional (Chinese) app which has a file manager capable of full system read/write access. This feature is used to copy the required files to the system folder.

If you are ready you can read our step-by-step guide on how to hack your Nokia Symbian Belle FP2 device below.

[NOTE] We do not recommend hacking your Symbian handset unless you are fully aware of the consequences and risks.

[DISCLAIMER] Improper use of this guide can result in loss of data or device malfunction which DJ’s Mobiles will not be responsible for. Please proceed at your own risk.

METHOD 01

1. Download BelleFP2_Hack_1_digipassion and extract its contents.
   -
2. Install NokiaBelleFP2_Hack_digipassion.sisto your E:/ drive (mass storage) and ignore any warning while you proceed with the installation.
   -
3. Once the installation in complete Safe Manager will launch itself (if not you can launch it manually from your menu.
   • You will receive three prompts when it launches. Select ‘No/Cancel’ all three times.
     -
4. Since the Safe Manager interface is in Chinese you will first have to change it to English to make it usable.
   • Connect your device to your computer in Mass Storage Mode
   • Close Nokia (PC) Suite if it is running
   • Open E:/ (mass memory) under My Computer
   • Go to folder where you extracted files in Step 1 and open English Files for Safe Mgr. and copy the files inside these folders to E:/ (mass memory) on your device according to the path they are in the extracted folders (replace files if prompted).
     -
5. Disconnect your device from the computer and launch Safe Manager from your menu
   • Select No if you receive any prompts
   • Go to Other > FileMgr and open E:/FP2hack
   • Use Options > Insert to select and copy updatedswicertstore.dat and paste it inside the C:/resource/swicertstore/dat folder.
     -
6. Now go to E:/FP2 hack and install ROMPatcherPlus_3.1_FP2.sisx 
   -
7. After installation is complete, run ROMPatcher+ and apply all patches. -

Once you are done you can enjoy installing any unsigned app or game to your Symbian Belle FP2 device.  

METHOD 02 If the above mentioned method doesn’t work for you for some reason, you can try using the following method instead.

1. Download BelleFP2_Hack_2_digipassion and extract its contents.
   -
2. Install Safe_Manager_Symbian.sisxto your E:/ drive (mass storage) and ignore any warning while you proceed with the installation.
   -
3. Once the installation in complete Safe Manager will launch itself (if not you can launch it manually from your menu.
   • You will receive three prompts when it launches. Select ‘No/Cancel’ all three times.
     -
4. Since the Safe Manager interface is in Chinese you will first have to change it to English to make it usable.
   • Connect your device to your computer in Mass Storage Mode
   • Close Nokia (PC) Suite if it is running
   • Open E:/ (mass memory) under My Computer
   • Go to folder where you extracted files in Step 1 and open English Files for Safe Mgr. and copy the files inside these folders to E:/ (mass memory) on your device according to the path they are in the extracted folders (replace files if prompted).
     -
5. Disconnect your device from the computer and launch Safe Manager from your menu
   • Select No if you receive any prompts
   • Go to Other > FileMgr and files you extracted in Step 1
   • Open the ROMPatcher drivers folder and copy the three .ldd files in this folder one at a time and past/insert them inside the C:/sys/bin folder.
     -
6. Install ROMPatcher+3.1_FP2_Lite.sisx to your device (it should be available in the file you extracted in Step
   -
7. After installation is complete, run ROMPatcher+ and apply all patches.

The ROMPatcher+v3.1 can only be used with Belle FP2 devices. It is not recommended to be used to hack older Symbian (Belle / Belle Refresh / Belle FP1) devices.